Impact Garden Sprinkler on Aluminium Tripod, 55-105 cm

This garden sprinkler tripod raises an impact sprinkler on an adjustable aluminium stand for watering lawns and gardens. The telescopic legs adjust from approx. 55 cm to 105 cm, so the sprinkler can work at different watering heights to suit the layout of your garden.

The frame is aluminium with black plastic fittings. A black head joins the three legs at the top, each leg has clamps that lock its sliding sections, and spreader braces meet at a black hub on the centre tube. That tube carries the water: it enters through a brass male quick-connect inlet at the bottom and leaves through the female outlet at the top, where the grey impact sprinkler head screws on. Black spiked feet slide onto the ends of the legs and push into soil or grass to help the stand stay in place.

The sprinkler waters either a part circle or a full one. Two angle limit collars on its stem set the arc anywhere from 30° to 330°, and raising the flip hook lets it turn through a full 360°. The deflector shield sets the throw between about 4.5 m and 11 m, and the diffuser pin changes the stream from a straight jet to a broken spray.

It suits lawns and garden areas with soil or grass underfoot, where the spiked feet can take hold. Assembly is required but needs no tools: the feet push onto the legs, the sprinkler screws onto the top and a hose fitted with a female quick connector clicks onto the inlet.