In stock
SKU:

Bike CO2 pump Presta Schrader

Bike CO2 pump cycle tyre tube inflator Presta Schrader with 16g gas cylinders

QuantityDiscount
21%
32%
43%
5+4%

From £8.99

Bike CO2 pump Presta Schrader with 16g charger sets

Product Information:

  • Non-flammable, non-toxic. No CFCs or HCFCs.
  • Non-corrosive.
  • Uses standard 3/8
  • 24UNF Threaded cartridges 12gm, 16gm, 25g and 38gm.
  • Complete with 2x16g CO2 and cartridge holder.
  • Can be used to inflate all bike tyres and even Motor Bikes, ATVs & Quad Bikes.
  • For or use with Schrader AND Presta Valves.

Directions for use:

  1. Place black foam cover over cartridge.
  2. Screw cartridge into inflator. Turn clockwise and firmly hand-tighten the cartridge onto the inflator. DO NOT remove cartridge until empty check by depressing trigger before removing.
  3. For fitting onto Schrader valve PUSH inflator onto the valve (no need to screw). For Prestavalve unscrew locking screw and push inflator onto valve.
  4. Push the inflator onto tyre using the sprung valve to control CO2 flow. Note contains freezing CO2 gas under pressure, so depress trigger gently!
  5. DO NOT dispense upside down.
  6. Replacing the cartridge:
      1. First depress trigger to check empty.
      2. Unscrew cartridge (counter-clockwise). Cartridge may be freezing and may still contain liquid CO2.3. Follow instructions above to install new cartridge.
Gas Cylenders

20 x 16g, 10 x 16g, 2 x 16g