In stock
SKU:

water butt /rain barrel/tank extender connectors for 1/2″+3/4″bsp taps

This extender can be easily screwed into existing threads if your container already has a female thread or if there is no pre-existing thread, you can create a hole and directly affix the device onto the barrel.

  • It is available in two thread sizes: 1/2″ bsp, which requires a 21mm hole,
  • 3/4″ bsp, which necessitates a 26mm hole.

If you opt for direct attachment onto the container, remove the back nut and one washer, then insert the device through the hole and secure it from the back using the washer and nut.

This ensures a tight seal with washers on both the inside and outside of the barrel, preventing any leaks.

Once installed, the device provides a 5 cm extension.

This product is currently out of stock and unavailable.

This extender can be easily screwed into existing threads if your container already has a female thread or if there is no pre-existing thread, you can create a hole and directly affix the device onto the barrel.

  • It is available in two thread sizes: 1/2″ bsp, which requires a 21mm hole,
  • 3/4″ bsp, which necessitates a 26mm hole.

If you opt for direct attachment onto the container, remove the back nut and one washer, then insert the device through the hole and secure it from the back using the washer and nut.

This ensures a tight seal with washers on both the inside and outside of the barrel, preventing any leaks.

Once installed, the device provides a 5 cm extension.
Size

1/2" BSP Female, 3/4" BSP Female