Alu110 vapor barrier foil, used in construction as an
insulating layer with vapor-tight properties. Its purpose is to isolate and
regulate the level of water vapor in the structures of walls, ceilings, floors
and roofs with attics. It is made of two outer layers of polyethylene foil and
an inner reinforcement layer of polypropylene mesh. Covering the upper
polyethylene layer with an aluminium layer, allows to obtain a reflex effect,
which enables reflection of heat rays. The reinforced layer ensures high tear
strength of the product.
Vapour Barrier Waterproof Thermal Insulation Aluminium Foil Membrane Roof Wall
Vapor barrier foil with an aluminium screen Alu 110
Weight: 110 g / m²
Roll dimensions: 1.5 m x 50 m = 75m²
Alu110 vapor barrier foil, used in construction as an
insulating layer with vapor-tight properties. Its purpose is to isolate and
regulate the level of water vapor in the structures of walls, ceilings, floors
and roofs with attics. It is made of two outer layers of polyethylene foil and
an inner reinforcement layer of polypropylene mesh. Covering the upper
polyethylene layer with an aluminium layer, allows to obtain a reflex effect,
which enables reflection of heat rays. The reinforced layer ensures high tear
strength of the product.
Alu 110 protects the building against heat loss by using the
effect of reflecting thermal energy (infrared radiation) from the reflective
surface. The efficiency of reflection of thermal radiation reaches up to 90%,
while energy losses by radiation constitute as much as 75% of the total heat
loss of a building. High tear resistance is guaranteed by a polypropylene
reinforcing mesh located between the layers of the foil.
Application
Alu 110 vapor barrier foil:
It is intended for attics to living quarters.
It is used both in ventilated and non-ventilated, sloping
and flat roofs as well as in vertical wall structures.
It is used as protection against wind and water vapor.
Advantages
Water vapor tight
It prevents heat loss caused by free air circulation
Provides additional wind and vapor barrier
It prevents the roof’s thermal insulation from getting damp
Thanks to the reinforcement, it is resistant to tearing
By reflecting thermal energy, it produces additional thermal
insulation effects
Flexible and easy to install
VAPOR INSULATION FOIL ALUMINUM PAROTEC ALU 110
Technical data:
- Width: 1.5 m
- Length: 50 m
- Weight: 110 g / m²
- Reactions to fire: class E
- Water tightness: tested at 2 kPa
- Impact strength: NPD
- Joint strength: NPD
- Water vapor transmission: 240 * 10⁹ m²sPa / kg (± 25%)
- Tensile strength along the length: ≥ 120 N / 5cm
- Tensile strength across: ≥ 50 N / 5cm
- Elongation along: ≥ 8%
- Elongation across: ≥ 8%
- Tear resistance: ≥ 60 N
- Tear resistance: ≥ 60 N
- Diffusion resistance to alkalis: NPD
- Diffusion resistance after artificial aging: positive
Size | 1m x 1.5m, 2m x 1.5m, 3m x 1.5m, 4m x 1.5m, 5m x 1.5m, 10m x 1.5m, 15m x 1.5m, 20m x 1.5m, 30m x 1.5m, 40m x 1.5m, 50m x 1.5m, 50m x 1.5m – 2 rolls, 50m x 1.5m – 3 rolls |
---|